6
After unpacking your new RO system and all the components, we recommend that you thoroughly inspect all
fittings and tubing to ensure nothing has come loose during shipping. If any part appears cracked or broken
from shipping, do not proceed with installation and contact us directly.
Email: support@nuaquasystems.com
Phone: 1(888) 621-0460
Inspection
Drill with a 1/4"
and 5/8" drill bit
Open ended
wrench
Phillips
screwdriver
Razor blade
14 mm
wrench
Recommended Tools
Installation Components
Optional Components
Drain saddle
Quick connectorFaucetPower Supply
Feed Water
Adapter
Filter Set
3/8” Tubing
1/4” Retaining Clip
Alkaline Filter Kit
UV Filter Kit
1/4” TubingLeak stop valve
RO System
3/8” Retaining Clip
To Next Page
Loading...