NUM 1020 M - 5.9 Part Programme Operations in Background Mode

en-938821/2 5 - 71
CNC Operation
5
5.9 Part Programme Operations in Background Mode
The operations for processing programmes (loading, unloading, editing) use specific CNC modes.
Since these modes are mutually exclusive, operations on programmes prevent the use of another mode and
particularly machining modes.
To avoid this problem and the consequent loss of time, the CNC includes functions which enable operations on
programmes to be performed in background mode while automatic, single, dry run or manual modes are being
executed.
Requirements
Basic softkeys displayed.
Actions
Select the "GRAPHIC PROGRAMMING" menu. ☞
PROCAM
Display of the "GRAPHIC PROGRAMMING" menu:
GRAPHIC PROGRAMMING
> 0 GRAPHIC DISPLAY PARAMETERS
1 PLANE 1
2 PLANE 2
3 TRACE WHILE CUTTING
4 INTERACTIVE PROGRAMMING
5 BACKGROUND EDIT
6 BACKGROUND LOAD
7 BACKGROUND UNLOAD
?❙
To select an item, move the cursor onto the item with the up and down arrow keys or enter the item number then
press .
If the system was in edit, load or unload mode, the mode is no longer selected.
Items 5, 6 and 7 are not displayed if the associated modes: background edit, background load and background unload
respectively, are inhibited.