Name: Numatic TT 4045
Brand: Numatic
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Trouble-Shooting

Failure to rectify the problem or in the event of a breakdown contact your Numatic dealer

or the Numatic Technical helpline +44 (0)1460 269268

( see back page for company addresses or dealers stamp)

PROBLEM CAUSE SOLUTION

Poor water pick-up Waste-water tank full

Clogged / blocked vacuum hose

Loose hose connections

Debris basket lter clogged/blocked

Separator lter clogged / blocked

Poor separator seal

Damaged separator seal

Damaged / split vacuum hose

Damaged oor-tool blades

Empty waste-water tank (page 12)

Remove and clean

Push tight connections

Remove and clean (page 12)

Remove and clean (Page 12)

Clean and ret (page 12)

Renew (contact service dept)

No brush / scrub function No brushes tted

Brush deck raised

Check and t (page 7)

Lower brush deck (page 8)

Little or no water ow Clean-water tank empty

Clean-water tank lter blocked/ clogged

Brush deck raised

Fill clean-water tank (page 9)

Remove and clean (12)

Lower brush deck (page 8)

Note

........................................................................................................

Daily

Keep the machine clean

Ensure brushes/ pads/ squeegee/ lters are in good condition

Check for any worn or damaged parts and replace immediately

Drain and rinse dirty water tank after every use

Store machine with brush deck secured in tilted position

Weekly – as daily and –

Check brush or pad and skirt and rinse

Check oor tool blades for wear and wipe clean

Clean separator assembly including lter and check condition of seal

Flush out system with clean water and clean lters

Do not steam clean or pressure wash

Twin Tec

Maintenance

Brand	Numatic
Model	TT 4045
Category	Floor Machine
Language	English

Numatic TT 4045 User Manual

Table of Contents

Questions and Answers:

Numatic TT 4045 Specifications

Related product manuals