Cup Holder Use
1 - Pivot Cup Holder up and lock in use position.
2 - Push center of Cup Holder down to extend to
opened position.
3 - While in the opened position, pull up on the
Cup Holder to remove for washing OR remove
for easier Rear Facing Belt Installation.
4 - To store, collapse Cup Holder and pivot down.
Cup Holders must be opened to access Belt
Path during Rear Facing Installation of Child
Restraint. Cup Holders may be collapsed down
against vehicle belt after belt installation.
DO NOT place glass or metal containers or hard
or sharp objects in Cup Holder. In a crash they
could cause serious injury.
30 RAVA instructions
1
2
3
4
31RAVA instructions
To Next Page
Loading...
