Nuna rava - Cleaning and Maintenance

Cleaning and Maintenance
WARNING: Do not attempt to disassemble
the Child Restraint. Only perform steps shown
in this manual.
Seat Cover Removal
1 - To remove seat pad:
a Recline Child Restraint to rear facing position
1 (BLUE).
b Set Head Support in highest position.
c Loosen and unbuckle Harness and Chest Clip.
d Fully extend Calf Support.
e Remove Tether from Storage Anchor.
Remove Harness/Buckle Pads as well as Infant
and Head Inserts.
Take care when removing Head Support Cover
so as not to damage the energy absorbing
foam.
62 RAVA instructions 63RAVA instructions
e
a
b
c
d
1