Nuna rava - Crotch Belt Adjustment; Adjusting Crotch Belt

1
2
Using Vehicle Lap Belt
1 - Route vehicle Lap belt through BLUE Rear
Facing Belt Path and buckle vehicle Lap Belt. (1)
Remove all slack from vehicle Lap Belt. (2)
2 - Close True Tension Door and replace Seat
Cover and Infant Insert (if used).
To open True Dension Door, unbuckle vehicle belt
and push down slightly on door to release tension.
Check Installation
Seat is in appropriate rear facing recline
position.
Seat is securely installed. Hold seat near rear-
facing belt path and move seat side to side, front
to back, and up and down. Seat should move
less than 1 inch.
Tether strap is not used for Rear Facing
Installation and must be secured in storage
location on back of Child Restraint.
Cup Holders may be placed in any position after
installation.
WARNING: Check that Child Restraint is
securely installed before each use.
1
2
48 RAVA instructions 49RAVA instructions