Cleaning the Infant Insert
When required, the Infant Insert may be machine
washed with a mild soap and cold water. The
support wedge located on the back side of the
Infant Insert should be spot cleaned only. DO NOT
machine wash the support wedge.
Allow to air dry.
Cleaning the Harness
The Child Restraint harness system cannot be
removed. DO NOT attempt to remove the harness
system.
When required, harness may be hand washed
with a sponge and warm soapy water.
Towel dry excess water and allow to air dry.
DO NOT attempt to iron your Harness.
Cleaning the Shell
When required, shell may be hand washed with
damp sponge.
Towel dry.
Cleaning the Buckle
BUCKLE CANNOT BE REMOVED.
To clean buckle, wipe with damp cloth.
DO NOT use abrasive cleansers on the Shell.
68 RAVA instructions
To Next Page
Loading...
