4
SECTION 1
INTRODUCTION
1.1 USE AND FUNCTION
The NF 800 / NF 800 R centrifuges are designed to separate liquids of different densities by
applying centrifugal force.
Different types of rotors, swing-out and angle rotors, can be fitted to the centrifuges.
The microprocessor control system of the centrifuges enables the user to observe and to control
the speed (RPM or RCF), the acceleration and braking rates, run time, program number and
temperature of the bowl for NF 800 R. The microprocessor control system also displays the RPM
or RCF value during the run.
The ventilation system of the NF 800 limits temperature in the bowl between the ambiant
temperature + 3 °C and ambiant temperature + 12 °C depending on the rotor type. The NF 800 R
is equipped with a cooling system which provides to operate between -9 °C and + 40 ° C.
The NF 800/800R centrifuges are manufactured according to the following standards,
EN 61010-1, EN 61010-2-020, EN 61000-6-3, EN 50419.
This device is in compliance with WEEE Regulation.
To Next Page
Loading...
