Problem Solution(s):
Blender becomes
clogged and not
operating efficiently:
1. Certain ingredients can cause clogging. If using
Plunger Lid, remove Plunger Cap from Lid and insert
Plunger through hole. Press ingredients down and
around until mixture loosens around bottom of Jar.
If using Vacuum Lid, unlock Release Valve, remove
Lid, and then use Plunger to scrape mixture around to
free ingredients.
2. Ingredient amounts higher than specified are being used.
Do not fill Jar above ¾ capacity (1.5 liters, 51 fl oz).
3. Large pieces of ice are not mixing properly. Use smaller
pieces of ice.
Blended mixture has
lumps or texture is
not even:
Air pocket has formed (cavitation) and mixture is
too cold or has solidified in areas, and blades are
spinning in cavity. Increase temperature by reducing
ice in recipe.
Noises or motions
unusual for
normal operation
of the blender are
detected:
1. Blade assembly may be loose, missing a part,
or possibly damaged. Turn blender OFF and
unplug immediately. DO NOT disassemble blade
assembly. Call Customer Service: 1-877-689-2838
or email help@nuwavenow.com.
2. Foreign objects from ingredients may have been
put into Jar and are making unusual sounds.
Prior to adding ingredients to Jar and blending,
clean fruits/other ingredients and remove all
debris or any objects.
TROUBLESHOOTING (Continued)
To Next Page
Loading...
