To Next Page

To Previous Page

PROPLUS 4.0 OPERATING MANUAL

SAFETY STOP

Upon ascent to within 5 ft (1.5 m) deeper than the SS (Safety Stop) depth set for 1 second, on a No Decompression dive in which depth exceeded

30 ft (9 m) for 1 second, a beep will sound and a Safety Stop at the depth set will appear on the Dive Main display with a countdown beginning at

the Safety Stop time set and counting down to 0:00.

• If the Safety Stop was set for OFF, the display will not appear.

• In the event that you descend 10 ft (3 m) deeper than the Stop Depth for 10 seconds during the countdown, or the countdown reaches 0:00, the

No Decompression Main screen will replace the Safety Stop Main screen which will reappear upon ascent to within 5 ft (1.5 m) deeper than the

Safety Stop depth set for 1 second.

• In the event that you enter Decompression during the dive, complete the Decompression obligation, then descend below 30 ft (9 m); the Safety

Stop Main will appear again upon ascent to within 5 ft (1.5 m) deeper than the Safety Stop depth set for 1 second.

• If you ascend to 3 ft (0.9 m) of the surface for 1 second, the Safety Stop will be canceled for the remainder of that dive.

• There is no penalty if you surface prior to completing the Safety Stop or choose to ignore it.

LOW BATTERY

WARNING: DO NOT dive with a low battery. Charge the battery before diving if your ProPlus 4.0 indicates the Battery Low

Warning or Alarm.

Warning Level

• The ProPlus 4.0 functions continue but the backlight and Bluetooth are disabled.

• The battery icon appears solid.

Alarm Level

• The ProPlus 4.0 functions continue but the backlight and Bluetooth are disabled.

• When the voltage is below that required for normal operation (< 2.50 volts), the graphics "CHG BATT" shall ash and the Battery icon shall ash

once per second for 5 seconds, then the unit is to shut off.

ashing

Oceanic Proplus 4.0 User Manual

Questions and Answers: