Oceanic Proplus 4.0 User Manual

22
PROPLUS 4.0 OPERATING MANUAL
© Pelagic, 2019 Doc. No. 12-5669-r01 (1/18/19)
5: DTR (DIVE TIME REMAINING)
The Dive Time Remaining Alarm allows you to set an alarm to go off with a designated reserve. Settings include OFF or 5 - 20 min of dive
time remaining.
SELADV
toggle
setting
save setting,
(proceed to Set Turn Alarm if
ON or OFF, to Set DTR Alarm
if SET)
Choose OFF, ON, or SET
ashing OFF, ON,
or SET
SELADV
toggle
setting
save
setting
Set DTR Alarm
DTR Alarm Triggered
ashing
ashing
15 - 20 min
6: TURN PRESS
The Turn Pressure Alarm allows you to set an alarm to go off at a designated turn pressure. You may choose from OFF or 1000 to 3000
PSI (70 to 205 BAR) in increments of 250 PSI (5 BAR).
SELADV
toggle
setting
save setting,
(proceed to Set End Alarm if
ON or OFF, to Set Turn Alarm
if SET)
Choose OFF, ON, or SET
ashing OFF, ON,
or SET
SELADV
toggle
setting
save
setting
Set Turn Alarm
Turn Alarm Triggered
ashing
ashing
7: END PRESS
The End Pressure Alarm allows you to set an alarm for when you reach a designated end pressure. You may choose from 500 to 1500 PSI
(20 to 105 BAR) in increments of 100 PSI (5 BAR).
NOTE: The Low Pressure Alarm only considers gas 1.
SELADV
toggle
setting
save setting,
(return to Set Alarms Lead-in if
ON or OFF, to Set Turn Alarm
if SET)
Choose OFF, ON, or SET
ashing OFF, ON,
or SET
SELADV
toggle
setting
save
setting
Set End Alarm
End Press Alarm Triggered
ashing
ashing

Oceanic Proplus 4.0 Specifications

General

Brand	Oceanic
Model	Proplus 4.0
Category	Diving Instrument
Language	English