Oceanic Proplus 4.0 User Manual

24
PROPLUS 4.0 OPERATING MANUAL
© Pelagic, 2019 Doc. No. 12-5669-r01 (1/18/19)
3: DEEP STOP
The Deep Stop feature can be set ON or OFF.
SELADV
toggle
setting
save setting
or ON
save setting,
(proceed to Set Algorithm if
ON or OFF, to Set Stop Time
if SET)
ashing OFF, ON,
or SET
4: SAFETY STOP
The Safety Stop feature can be set ON or OFF. If SET is selected, you may choose from an available 3 or 5 min Safety Stop at depths of
10, 15, or 20 ft or (3, 4, 5, or 6 m).
SELADV
toggle
setting
Set Safety Stop
SELADV
toggle
setting
Set Stop Time
or 5:00
(min:sec)
save setting
SELADV
toggle
setting
Set Stop Depth
(10, 15; 20 ft)
or (3, 4, 5; 6 m)
save setting
5: ALGORITHM
This feature allows the choice of using the Z+ or DSAT algorithms, for nitrogen and oxygen calculations. See page 12 for further Dual
Algorithm details.
NOTE: Changing the algorithm is blocked during 24 hours after NORM dives unless Desat time decreases to 0:00.
SELADV
toggle
setting
save setting
or Z+

Oceanic Proplus 4.0 Specifications

General

Brand	Oceanic
Model	Proplus 4.0
Category	Diving Instrument
Language	English