Octalarm T2 - Settings Summary

Settings summary
Adesys bv, Wateringen, NL
52 Octalarm-T2 / T4 / T8 / T16
Prog 23: set alarm in display
display text
channel 1
channel 2
channel 3
channel 4
channel 5
channel 6
channel 7
channel 8
display text
channel 9
channel 10
channel 11
channel 12
channel 13
channel 14
channel 15
channel 16
Prog 31: set alarm buzzer
alarm buzzer on direct at alarm
if dialling fails
after delay
min
volume internal buzzer
alarm buzzer off after tel. reset
by reset key
after delay
min
Prog 41: set dialler
(analogue model)
report delay min
auto answer off
on
after rings
dial mode tone (dtmf)
pulse (dtmf)
wait for first dialling tone yes
no
telephone line test on
off
Prog 41: set dialler (ISDN model)
report delay min
MSN number (without prefix)
CLIP number (without prefix)
auto answer off
on
after rings
telephone line test on
off