Need help?Do you have a question about the OCULUS Pentacam AXL and is the answer not in the manual?
General| Measurement Accuracy | ± 0.02 mm |
|---|---|
| Axial Length Measurement | Yes |
| Anterior Segment Analysis | Yes |
| Type | Rotating Scheimpflug camera system |
| Measurement Principle | Scheimpflug imaging |
| Data Output | DICOM |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Optical Zone Diameter | Up to 12 mm |
| Measurement Time | 2 seconds |
| Data Transfer | USB, Ethernet |
| Display | Touchscreen |
| Measurement Capabilities | Keratometry, Pachymetry, Anterior Chamber Analysis, Axial Length Measurement |
| Scan Speed | 25 images per second |
| Software | Pentacam Software |
Details the design, operation, and safety of the Pentacam AXL unit.
Describes software features, examination, analysis, and data management.
Guide for installing the Pentacam AXL software and drivers.
Information on reading and following the manual, and understanding pictograms.
Critical safety guidelines for operating the Pentacam AXL correctly and preventing hazards.
Guidelines for securing the device and patient data against unauthorized access.
Specifies the medical conditions and purposes for which the device is indicated.
Lists conditions or situations where the device should not be used.
Potential adverse effects that may occur during or after using the device.
Identifies and describes the main physical parts of the Pentacam AXL unit.
Explains the technical principles and operational flow of the Pentacam AXL.
Instructions for correctly connecting the device to a power source.
Step-by-step guide to powering up the Pentacam AXL device.
Procedures for safely powering down the Pentacam AXL device.
Details on installing the Pentacam software on multiple computers.
Steps to access and initiate the patient data management system.
Process for adding new patient records into the system.
How to search for and select previously entered patient records.
Instructions for retrieving and opening past patient examinations.
Steps to initiate a new measurement within the Pentacam AXL program.
Overview of the user interface elements in the Scan menu.
Configuration options for capturing Scheimpflug images.
Detailed steps for performing axial length measurements.
Steps for measuring the anterior segment of the eye.
How to interpret and check the quality of measurement results.
How to edit and change existing patient record details.
Process for saving and transferring patient data to other systems.
Steps for loading patient data from external sources into the system.
Procedures for creating and managing backup copies of patient data.
Procedure for performing tomography test measurements.
Procedure for performing axial length test measurements.
Instructions for cleaning the various parts of the Pentacam AXL.
Guidelines for disinfecting the device and its accessories.
Information on recommended service intervals and checks.
Environmental conditions and guidelines for transporting and storing the device.
Steps for safely dismantling the Pentacam AXL for transport.
Explains the warranty provisions and conditions for the Pentacam AXL.
Details on liability and conditions that may void the warranty.
Specifications for the device's hardware components and capabilities.
Defines the operational limits and precision for measurements.
Technical details of the power supply unit used with the device.
Information regarding EMC compliance and potential interference.
Declaration concerning electromagnetic emissions and compliance standards.
Guidelines for connecting the device to a computer network.
To Next Page
