12 Managing Patient Data
Instruction Manual Pentacam® AXL (G/70100/EN 1121 Rev04) 53 / 85
The default options for import and export of data are configured in the
"Settings" field, see also the User Guide.
Depending on the settings, you may not have to perform all of the
following steps (e.g. selection of the directory).
Select the "Target" (1) where you would like to export the data.
Recommendation: Export the patient data using the "Single file (U12)"
option.
Press the [...] button. (2).
In the dialog that appears, select the folder or the file to which the
patient data should be exported.
Confirm your selection with [OK] or [Save].
Select whether the data with or without camera images and possibly
to be exported anonymously.
Click [Export] to export the data.
The patient and examination data have now been saved at the
destination specified.
You can send data stored on the hard drive as an e-mail attachment.
Note
Requirements for transferring data to another PC:
The Pentacam® AXL program must be installed on the other PC. If the
program is updated on the Pentacam® AXL PC (sender), the program
on the other PC (recipient) must also be updated.
Make sure, that the PC is connected to a local network controlled by
the Floating License Key or that a single license key is connected to
the PC in order to interactively evaluate the exams.
To Next Page
Loading...
Need help?
General
