● Reverse the polarity of the jumper
cables when connecting to the batteries.
This could cause the battery to explode
and severe injury.
Blown Fuses
All of the electrical circuits on your UTV have
fuses to protect them from damage caused
by excess current flow or short-circuiting.
If something electrical on your UTV stops
working, the first thing you should check for is
a blown fuse (1).
Check all the fuses before looking elsewhere
for another possible cause of the problem.
Replace any blown fuses and check
component operation.
1. Blown fuse
Fuse replacement
The main fuse and the fuse box are
located under the hood upper cover. If a
fuse is blown, turn off the main switch and
install a new fuse of the specified
amperage.
To Next Page
Loading...