POTENTIAL HAZARD
Freezing control cables in cold weather.
WHAT CAN HAPPEN
You could be unable to control the vehicle,
which could lead to an accident or collision.
HOW TO AVOID THE HAZARD
When riding in cold weather, always make
sure all control cables work smoothly before
you begin riding.
1. Apply the brake.
2. Shift the drive select lever into the neutral
position.
3. With your foot off the accelerator pedal,
start the engine by turning the key to
"START".
4. Continue warming up the engine until it
idles smoothly.
NOTE:
● When the drive select lever is in the
neutral position, the neutral indicator light
should come on. If the neutral indicator
light does not come on, ask our company
or dealer to inspect the electric circuit.
● The engine can be started in any gear if
the brake is applied. However, it is
recommended to shift into neutral before
starting the engine.
If the engine fails to start, release the key,
To Next Page
Loading...