Tail/brake light bulb
replacement
If a tail/brake light bulb burns out, replace it
as follows:
1. Left and right tail light on the rear plate,
can take off back of it.
1. Rear plate
2. Tail lamp
2. Push the defective bulb in and turn it
counter-clockwise to remove it from the
bulb holder.
1. Tail/brake light bulb holder
2. Steering lamp holder
3. Push the new bulb in and turn it
clockwise to install in the bulb holder.
4. Install the bulb holder together with the
bulb by turning it clockwise.
To Next Page
Loading...