EasyManua.ls Logo

ODES UTVS Raider - Accelerator Pedal; Seat Belts; Steering; Fittings and Fasteners

ODES UTVS Raider
141 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 81 -
Accelerator pedal
Check to see that the gas pedal operates
correctly. It must operate smoothly and fully
spring back to the idle position when
released. Have a dealer repair if necessary
for proper operation.
Seat belts
Make sure that both seat belts are not
frayed or damaged.
The seat belt must move smoothly when
pulled. The latch plate should click securely
into the buckle and release when the
release button is pushed. Wash off any dirt
or mud, which could affect operation. Have
a dealer repair if necessary.
Steering
Park on level ground. Turn the steering
wheel right and left. Check for excessive
free play, abnormal noises, or a rough
feeling. Have a dealer repair if necessary
for proper operation.
Fittings and fasteners
Always check the tightness of chassis
fittings and fasteners before a ride. Take the
vehicle to an authorized dealer or refer to
the Service Manual for correct torque
specifications.

Table of Contents