cause the minute to change．(To
change the minute，press volume
up or down).
Accelerator pedal
Press the gas pedal down to increase
engine speed. Spring pressure returns the
pedal to the rest position when released.
Always check that the gas pedal returns
normally before starting the engine.
1. Accelerator pedal
Before starting the engine, check the gas
pedal to be sure it is operating correctly.
Make sure the gas pedal fully returns to the
idle position as soon as it is released.
POTENTIAL HAZARD
Malfunction of the accelerator pedal.
WHAT CAN HAPPEN
The accelerator pedal could be hard to
operate, making it difficult to speed up or slow
down then you need to. This could cause an
accident, injury, or death.
HOW TO AVOID THE HAZARD
Check the operation of the gas pedal before
you start the engine. If it does not work
smoothly, check for the cause. Correct the
problem before operating the vehicle. Consult
your dealer if you can’t find or solve the
problem yourself.
To Next Page
Loading...