Pre-drive Inspection
The following items need to be checked
before you get on the UTV:
● Engine oil
Look for any leaks. Check the level of oil
and add if needed.
● Coolant
Check for leaks. Add coolant if needed.
● Fuel
Check the level and add fuel if needed.
Make sure the fuel cap is securely
fastened. Check for leaks.
● Tires
Use a gauge to check the tire pressure.
Adjust if needed. Also look for signs of
damages or excessive wear.
● Nut &Bolts
Check the wheels to see that the axle
nuts are tightened.
● Underbody & Exhaust System Check for,
and remove any dirt, brush or other
debris that could be a fire hazard or
interfere with the proper operation of the
UTV.
● Air Cleaner
Check the air filter. Replace if needed.
● Leaks, Loose Parts
Inspect your UTV and look for anything
that appears unusual, such as a leak or
loose cable.
● Lights
Make sure the headlights, brake lights,
and taillights are working properly.
● Throttle
Check the free play and adjust if needed.
Press the throttle to make sure it moves
smoothly without sticking and snaps back
automatically when it is released.
To Next Page
Loading...