4．Insert a new headlight bulb holder
assembly by inserting it and turning it
clockwise
1. Do not touch the glass part of the bulb
CAUTION:
Do not touch the glass part of the
headlight bulb to keep it free from oil,
otherwise the transparency of the glass,
the luminosity of the bulb, and the bulb life
will be adversely affected. Thoroughly
clean off any dirt and fingerprints on the
headlight bulb using a cloth moistened
with alcohol or thinner.
5. Install the headlight bulb holder by turn.
6. Install the headlight bulb holder cover at
the rear of the headlight.
To Next Page
Loading...