(4).APS.
This mode scans stations of sufficient
strength and stores them as pre-sets.
(5).POWER.
Turns the unit on/off.
(6). 1
Preset one while in AM/FM mode;
Play/Pause button while in USB or
Bluetooth mode.
(7). 2/INT
Preset two while in AM/FM mode；
“Introduction” mode while in USB or
Bluetooth mode.
(8). 3/RPT
Preset Three while in AM/FM mode;
“Repeat” mode while in USB or
Bluetooth. Repeat refers to the unit’s
ability to repetitively play the existing
track.
(9).4/RDM.
Preset four while in AM/FM mode;
“Random” mode while in USB or
Bluetooth. Random refers to the unit’s
ability to randomly sequence and play
songs from the music device.
(10).
This symbol refers to track up; this
symbol also refers to fast forward.
(11).
This symbol refers to track down; this
symbol also refers to rewind.
2. Radio operation
(1). Press BAND to access AM and FM.
There are three FM bands and two
AM bands each consisting of four
channels.
(2). APS Button. Pressing this button will
ask the unit to find.
(3). Manual vs Automatic Tuning.
Automatic quick Press or to
To Next Page
Loading...