Unscrew the coolant drain plug and
drain the coolant into a suitable
container.
1. Coolant drain plug
NOTE: Do not unscrew the coolant
drain plug completely.
Unscrew the bleeding screw on the top
of the thermostat housing.
Drain the system completely and
reinstall the coolant drain plug.
Pinch hose between radiator and the
thermostat housing with a large pincher
or an equivalent.
CAUTION: Do not use vise-grip
pliers to pinch hose.
Fill the radiator until the coolant comes
out by the thermostat housing hole.
Complete the radiator filling.
Check the level in the coolant reservoir
To Next Page
Loading...