Why does the battery fail to charge fully on OHAUS EB6 Scales?
If the battery in your OHAUS Scales fails to charge fully, it may be defective or past its useful life. Replace the battery through an authorized service dealer.
What to do if OHAUS EB6 Scales does not respond to front panel controls?
If the OHAUS Scales does not respond to front panel controls, the Membrane Switch might be defective. Test the Membrane Switch as described in Section 3.2 and replace it if necessary. Alternatively, the Main PC Board could be defective. Test the Main PC Board as described in Section 3.4, and if defective, replace it.
How to troubleshoot OHAUS EB6 Scales that will not turn on using battery power?
General| Display | LCD |
|---|---|
| Capacity | 6 kg |
| Power Supply | 4 AA batteries |
| Calibration | External |
| Units of Measurement | g, oz, lb |
| Power | 4 AA batteries |
| Units | g, oz, lb |
Concise overview of the scale's purpose and design for industrial weighing applications.
Lists key specifications like capacity, resolution, display type, weighing units, and application modes.
Essential guidelines for safe and dependable operation, covering power, environment, and handling.
Instructions for checking included components and saving packaging material for protection.
Steps for attaching the weighing platform and removing/re-installing the shipping protection screw.
Guidance on choosing a suitable operating environment, avoiding adverse conditions like temperature changes or vibrations.
Procedure to ensure the scale is level using the front panel indicator and leveling feet for accurate readings.
Details on connecting AC adapter and information about battery charging, operation, and life.
Recommendation and requirement for calibration before first use to ensure accurate weighing results.
Explanation of various icons and indicators shown on the scale's display.
Description of the scale's buttons and their primary functions like TARE, M+, UNITS, CHECK, COUNT, ZERO, %.
Instructions on how to power the scale on and off using the power switch located underneath.
Step-by-step guide for performing a manual tare operation to remove container weight from measurements.
How to re-zero the scale display using the ZERO button for accurate measurements.
Procedure for switching between different measurement units (kg, g, lb, oz) using the UNITS button.
Guide to using the scale for check-weighing, counting items, and percentage checks against Hi-Lo limits.
Steps for sampling and calculating the average weight of individual pieces for counting operations.
How to cycle through Piece Count, APW, and Total Weight displays in counting mode.
Instructions for accumulating weight and count data into memory using the M+ button.
How to perform weighing operations based on a percentage of a reference weight using the % button.
Setting the displayed scale increment (readability or graduation) for measurement precision.
Configuration options for the display backlight activation mode (Auto, On, Off).
Adjusting the range within which the zero reading is maintained automatically.
Setting the stabilization level for accurate readings under varying environmental conditions.
To Next Page
