EasyManua.ls Logo

OHAUS Explorer EX125D - User Manual

OHAUS Explorer EX125D
164 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Explorer
®
Balances
Instruction Manual
w ww . . co m
information@itm.com1.800.561.8187

Table of Contents

Other manuals for OHAUS Explorer EX125D

Preview: User Guide
User Guide64 pages

Questions and Answers

  • R
    regina08Aug 12, 2025
    How to fix 'Cannot calibrate' error on OHAUS Scales?
    • B
      Brian RiosAug 12, 2025
      If the OHAUS Scales display 'Cannot calibrate', first ensure that the Calibration Menu is not locked; if it is, turn the Calibration menu lock off. Also, check if LFT is turned on; if so, turn LFT off. An unstable environment can also prevent calibration, so move the balance to a more suitable location. Finally, verify that you are using the correct calibration masses; if not, use the correct ones.
  • J
    Jeremy HernandezAug 16, 2025
    Why OHAUS Scales will not turn on?
    • C
      Christopher JordanAug 16, 2025
      If your OHAUS Scales are not turning on, it could be due to a lack of power. Verify the connection and voltage to ensure the balance is receiving power.
  • J
    josephmartinezAug 19, 2025
    How to resolve 'Invalid Piece Weight' error on OHAUS Explorer EX125D Scales?
    • J
      Jessica WilliamsonAug 20, 2025
      If your OHAUS Scales display 'Invalid Piece Weight', it means the average piece weight is too small. To resolve this, increase the average piece weight.
  • E
    Elizabeth JohnsonAug 25, 2025
    What to do if OHAUS Explorer EX125D Scales show 'Operation Timeout'?
    • K
      Kim DavisAug 25, 2025
      If your OHAUS Scales display 'Operation Timeout', it means the weight reading is not stable. To resolve this, move the balance to a more suitable and stable location.
  • A
    Anthony AndrewsAug 27, 2025
    Why are my OHAUS Scales showing poor accuracy?
    • D
      Daniel WestAug 27, 2025
      If your OHAUS Scales are showing 'Poor accuracy', it could be due to improper calibration. In this case, perform a calibration. Alternatively, an unstable environment may be the cause; move the balance to a more suitable location.
  • F
    fowlerjamesAug 31, 2025
    What to do if I cannot change menu settings on OHAUS Explorer EX125D Scales?
    • S
      Stephanie AndersonAug 31, 2025
      If your OHAUS Scales display 'Cannot change menu settings', it could be because the sub-menu is locked. Unlock the sub-menu to regain access to the settings. Another possibility is that LFT is set to on; in this case, turn LFT off.
  • N
    ngibsonSep 3, 2025
    What does 'Low Reference weight' mean on OHAUS Scales?
    • V
      villaheatherSep 4, 2025
      If the OHAUS Scales display 'Low Reference weight', this indicates that the reference weight is too small. Increase the sample size to resolve this issue.
  • B
    Breanna WilsonSep 7, 2025
    What to do if OHAUS Explorer EX125D Scales display 'Busy (tare, zero, printing)'?
    • G
      Gina WellsSep 7, 2025
      If the OHAUS Scales display 'Busy (tare, zero, printing)', wait until the current operation is completed.

OHAUS Explorer EX125D Specifications

General IconGeneral
Capacity120 g
Pan Size90 mm
DraftshieldYes
Operating Temperature Range10 °C to 30 °C
Power SupplyAC Adapter
Protection ClassIP54
Stabilization Time2 seconds
CalibrationAutomatic internal calibration
DisplayLCD
CommunicationRS232
Operating Temperature10°C to 30°C
PowerAC adapter
Unitsg, mg, oz, ct, dwt, grain, Newton

Related product manuals