OHAUS Explorer EX224 User Manual (English)

Questions and Answers:

R
robert24Aug 12, 2025
How to fix 'Cannot calibrate' error on OHAUS Explorer EX224?
- A
  Alyssa SheltonAug 12, 2025
  If the OHAUS Scales display 'Cannot calibrate', first ensure that the Calibration Menu is not locked; if it is, turn the Calibration menu lock off. Also, check if LFT is turned on; if so, turn LFT off. An unstable environment can also prevent calibration, so move the balance to a more suitable location. Finally, verify that you are using the correct calibration masses; if not, use the correct ones.
O
omossAug 15, 2025
Why OHAUS Explorer EX224 Scales will not turn on?
- D
  Deborah ColemanAug 16, 2025
  If your OHAUS Scales are not turning on, it could be due to a lack of power. Verify the connection and voltage to ensure the balance is receiving power.
J
jose83Aug 19, 2025
How to resolve 'Invalid Piece Weight' error on OHAUS Explorer EX224 Scales?
- K
  kelseysandersAug 19, 2025
  If your OHAUS Scales display 'Invalid Piece Weight', it means the average piece weight is too small. To resolve this, increase the average piece weight.
A
Andrew GrahamAug 23, 2025
What to do if OHAUS Explorer EX224 show 'Operation Timeout'?
- L
  Lori HenryAug 23, 2025
  If your OHAUS Scales display 'Operation Timeout', it means the weight reading is not stable. To resolve this, move the balance to a more suitable and stable location.
D
Daniel WernerAug 27, 2025
Why are my OHAUS Explorer EX224 Scales showing poor accuracy?
- G
  grobertsonAug 27, 2025
  If your OHAUS Scales are showing 'Poor accuracy', it could be due to improper calibration. In this case, perform a calibration. Alternatively, an unstable environment may be the cause; move the balance to a more suitable location.
M
michaelperryAug 31, 2025
What to do if I cannot change menu settings on OHAUS Explorer EX224?
- T
  Theresa MendezAug 31, 2025
  If your OHAUS Scales display 'Cannot change menu settings', it could be because the sub-menu is locked. Unlock the sub-menu to regain access to the settings. Another possibility is that LFT is set to on; in this case, turn LFT off.
B
Breanna MccannSep 3, 2025
What does 'Low Reference weight' mean on OHAUS Scales?
- M
  Maria JohnsonSep 3, 2025
  If the OHAUS Scales display 'Low Reference weight', this indicates that the reference weight is too small. Increase the sample size to resolve this issue.
G
George ScottSep 7, 2025
What to do if OHAUS Explorer EX224 display 'Busy (tare, zero, printing)'?
- A
  anthony38Sep 7, 2025
  If the OHAUS Scales display 'Busy (tare, zero, printing)', wait until the current operation is completed.