OHAUS Explorer EX224 - Auto Print; Print Calibration Data; Print Content

EXPLORER BALANCES EN-101
5.9.7 Auto Print
Set the automatic printing functionality.
OFF = disabled
ON STABLE = printing occurs each time the stability criteria are met.
INTERVAL = printing occurs at the defined time interval.
CONTINUOUS = printing occurs continuously.
When ON STABLE is selected, set the conditions for printing.
LOAD = Prints when the displayed load is stable.
LOAD ZERO = Prints when the displayed load or zero reading is stable.
When INTERVAL is selected, set the time interval using the numeric keypad.
Settings of 1 to 3600 seconds are available.
5.9.8 Print Calibration Data
Set the automatic Calibration Data printing functionality.
OFF = disabled
ON = enabled
5.9.9 Print Content
Enter this sub-menu to define the content of the printed data.
See details below: