EasyManua.ls Logo

OHAUS Explorer EX1241 - User Manual

OHAUS Explorer EX1241
164 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Explorer
TM
Balances
Instruction Manual

Table of Contents

Questions and Answers

  • A
    Alexander MillerAug 12, 2025
    How to fix 'Cannot calibrate' error on OHAUS Scales?
    • E
      Elizabeth LopezAug 12, 2025
      If the OHAUS Scales display 'Cannot calibrate', first ensure that the Calibration Menu is not locked; if it is, turn the Calibration menu lock off. Also, check if LFT is turned on; if so, turn LFT off. An unstable environment can also prevent calibration, so move the balance to a more suitable location. Finally, verify that you are using the correct calibration masses; if not, use the correct ones.
  • A
    Ashley SandersAug 15, 2025
    Why OHAUS Explorer EX1241 Scales will not turn on?
    • T
      Thomas WigginsAug 15, 2025
      If your OHAUS Scales are not turning on, it could be due to a lack of power. Verify the connection and voltage to ensure the balance is receiving power.
  • M
    Micheal GrahamAug 20, 2025
    How to resolve 'Invalid Piece Weight' error on OHAUS Explorer EX1241 Scales?
    • J
      John PhelpsAug 20, 2025
      If your OHAUS Scales display 'Invalid Piece Weight', it means the average piece weight is too small. To resolve this, increase the average piece weight.
  • M
    martindonnaAug 23, 2025
    What to do if OHAUS Scales show 'Operation Timeout'?
    • H
      Holly MooreAug 23, 2025
      If your OHAUS Scales display 'Operation Timeout', it means the weight reading is not stable. To resolve this, move the balance to a more suitable and stable location.
  • J
    jedwardsAug 27, 2025
    Why are my OHAUS Scales showing poor accuracy?
    • J
      Jose MontgomeryAug 27, 2025
      If your OHAUS Scales are showing 'Poor accuracy', it could be due to improper calibration. In this case, perform a calibration. Alternatively, an unstable environment may be the cause; move the balance to a more suitable location.
  • S
    Sharon WilliamsAug 30, 2025
    What to do if I cannot change menu settings on OHAUS Explorer EX1241?
    • D
      dmeadowsAug 30, 2025
      If your OHAUS Scales display 'Cannot change menu settings', it could be because the sub-menu is locked. Unlock the sub-menu to regain access to the settings. Another possibility is that LFT is set to on; in this case, turn LFT off.
  • J
    Jacob McdonaldSep 3, 2025
    What does 'Low Reference weight' mean on OHAUS Explorer EX1241?
    • P
      pagelawrenceSep 4, 2025
      If the OHAUS Scales display 'Low Reference weight', this indicates that the reference weight is too small. Increase the sample size to resolve this issue.
  • W
    westjoseSep 7, 2025
    What to do if OHAUS Scales display 'Busy (tare, zero, printing)'?
    • M
      mckeemariaSep 7, 2025
      If the OHAUS Scales display 'Busy (tare, zero, printing)', wait until the current operation is completed.

OHAUS Explorer EX1241 Specifications

General IconGeneral
BrandOHAUS
ModelExplorer EX1241
CategoryScales
LanguageEnglish

Related product manuals