OHAUS Explorer EX224 - Dynamic Weighing - Semi-Auto

EN-42 EXPLORER BALANCES
Dynamic Weighing Application Setups (defaults in Bold)
Item Available Settings Comments
Enabled On, Off Turns Application on/off
Auto Sample Mode Manual,
Semi Automatic
Automatic
To select the Mode
Statistics Off, Manual, Auto
Lock Settings On, Off Press to lock the current setting(s)
so they cannot be changed.
Reference fields
Averaging Time On, Off Time in Seconds
Gross On, Off Gross weight is displayed
Net On, Off Net weight is displayed
Tare On, Off Tare weight is displayed
Print Options
See Printing Section.
Averaging Time On, Off
4.5.3 Dynamic Weighing – Semi-Auto
The cycle begins when an object (animal) is placed on the pan, but the held value must be reset manually.
To enable this feature, touch the Setup Icon (wrench) in the
top-center of the main screen to enter the
Dynamic Weighing Setup menu.
Change the mode to Semi Automatic.
The Dynamic – Semi-Automatic screen appears with the
default (or last) Averaging Time displayed.
Place specimen
on the Pan. The
cycle starts
automatically.
After the cycle
ends, the weight
reading is held.
Press the
Reset
button to clear the
reading and return
to zero.