OHAUS Explorer EX224 - Functions Configuration; Touchless Sensor Setup; Draft Shield Light

EXPLORER BALANCES EN-93
5.4.6 Functions Configuration
Touch Functions Configuration to see a table of Selected and
Available functions. Press > to move a function from Available to
Selected, and press < to move them back.
To move all functions to the right, Press >> and press <<
to move them back.
5.4.7 TouchLess Sensor Setup
If desired, assign Print, Zero, Tare, or Calibrate
to the Touchless Sensors Terminal Right, Terminal Left,
Base Right, and Base Left.
5.4.8 Draft Shield light
Set the status of the lighted Draft Shield feature.
OFF = disabled.
ON = enabled.