EXPLORER BALANCES EN-63
4.10.2 Application Setup
The Application can be customized for various user preferences.
Touch the
Setup
Icon (wrench) to
enter Application
Setup from the
home screen.
The
Setup Menu
appears.
Select the list item to view or change the setting as
desired.
To return to the Application home screen, touch
Done
.
The Density Application Setups (defaults in Bold)
Item Available Settings Comments
Enabled On, Off Turns Application on/off
Density Type Solid, Liquid To select either solid or liquid
Liquid Type Water, Other Liquid used during measurements
Porous Material On, Off To select Porous material
Auto Print Result On, Off To automatically print results
Auto Sample Mode On, Off To select the mode
Reference fields
Liquid Density On, Off Test liquid’s density is displayed
Water Temperature On, Off The water temp is displayed
Oil density On, Off The test oil’s density is displayed
Weight in Air On, Off The sample weight is displayed
Oiled Weight On, Off The sample weight is displayed
Weight in Liquid On, Off The sample weight is displayed
Sinker volume On, Off Displays volume of the Sinker
Print Options
See Printing Section.
Porous Material On, Off
Liquid Type On, Off
Liquid Density On, Off
Water Temperature On, Off
Weight in Air On, Off
Weight in Liquid On, Off
To Next Page
Loading...
