EN-84 EXPLORER BALANCES
4.14.3 Application Setup
The Application can be customized for various user preferences.
Touch the
Setup
Icon (wrench) to enter
Application Setup
from
the home screen.
The
Setup Menu
is now displayed.
Select the list item to view or change the setting as
desired.
To return to the Application home screen, touch
Done.
The SQC Application Setups (defaults in Bold)
Item Available Settings Comments
Enabled On, Off Turns Application on/off
Number of Samples 2 – 80 (default 10) To select the number of samples in a Batch
Tolerance Mode Weight,
Percent
Tolerance used during measurements
Auto Sample Mode Manual,
Semi Automatic,
Automatic
To select the mode of operation
Lock Settings On, Off Press to lock the current setting(s) so they
cannot be changed.
Reference fields
Number of Batches On, Off The total batches
Number of Samples On, Off The total samples
Average On, Off The Average value is displayed
Total On, Off The Sum value is displayed
Maximum On, Off The Maximum value is displayed
Minimum On, Off The Minimum value is displayed
Range On, Off The Range is displayed
Print Options
See Printing Section.
Number of Batches On, Off
Number of Samples On, Off
Average On, Off
Total On, Off
Maximum On, Off
Minimum On, Off
Range On, Off
To Next Page
Loading...
