EXPLORER BALANCES EN-25
4.2.2 Application Setup
The Application can be customized for various user preferences.
Touch the
Setup Icon
(wrench) to enter
Application Setup
.
The Application Setup Menu appears.
Select the list item to view or change the setting as
desired.
To return to the Application home screen, touch
Done
.
The Counting Application Setups are below (defaults in Bold).
Item Available Settings Comments
Enabled On, Off Turns Application on/off
Auto Optimization On, Off
Counting Mode Standard Counting,
Check Counting,
Fill Counting
Select the Mode
Secondary Unit On, Off To show the Second Display line
Statistics Off, Manual, Auto
Lock Settings On, Off
Press to lock the current setting(s)
so they cannot be changed.
Reference fields
APW On, Off The APW is displayed
Gross On, Off Gross weight is displayed
Net On, Off Net weight is displayed
Tare On, Off Tare weight is displayed
Target On, Off Used for Check-Fill only
Difference On, Off Used for Check-Fill only
Over Limit On, Off Used for Check-Counting only
Under Limit On, Off Used for Check-Counting only
Print Options
See Printing Section.
APW On, Off
Sample Size On, Off
Target On, Off Used for Check-Fill only
Difference On, Off Used for Check-Fill only
Over Limit On, Off Used for Check-Counting only
Under Limit On, Off Used for Check-Counting only
To Next Page
Loading...
