OHAUS Explorer EX224 - Page 104

EN-102 EXPLORER BALANCES
Header
Set the status.
OFF = the user defined header is not printed.
ON = the user defined header is printed.
USER DEFINED TEXT
USER DEFINED TEXT
USER DEFINED TEXT
USER DEFINED TEXT
USER DEFINED TEXT
NOTE: The header information must be defined
using the H x “text” interface command.
(See Section 5.1.)
Date and Time
Set the status.
OFF = the time and date are not printed.
ON = the time and date are printed.
01/31/10 12:30 PM
Balance ID
Set the status.
OFF = the Balance ID value is not printed.
ON = the Balance ID value is printed.
Balance Id:
XXXXXXXXXXXX
Balance Name
Set the status.
OFF = the Balance Name is not printed.
ON = the Balance Name is printed.
Balance Name:
XXXXXXXXXXXXXX
User Name
Set the status.
OFF = the User Name is not printed.
ON = the User Name is printed.
User Name: XXXXXXXXXXXX
Project Name
Set the status.
OFF = the Project Name is not printed.
ON = the Project Name is printed.
Project Name: XXXXXXXXXXXX
Application Name
Set the status.
OFF = the Application Name is not printed.
ON = the Application Name is printed.
Result
Set the status.
OFF = the displayed reading is not printed.
ON = the displayed reading is printed.
NUMERIC ONLY = only the numeric portion of
the displayed reading is printed.
Gross
Set the status.
OFF = the gross weight is not printed.
ON = the gross weight is printed.
12.000 kg
Net
Set the status.
OFF = the net weight is not printed.
ON = the net weight is printed.
Tare
Set the status.
OFF = the tare weight is not printed.
ON = the tare weight is printed.
Information
Set the status.
OFF = the reference info is not printed.
ON = the reference info is printed.
Note: See below for more clarification
Signature Line
Set the status.
OFF = the Signature Line is not printed.
ON = the Signature Line is printed.
Signature:__________________
Application Name: XXXXXXXXXXXX
10.000 kg NET