EN-36 PR Series Balance
Table 9-4 SPECIFICATIONS (continued)
Verification interval e(g)
Repeatability (STDEV)
(g)
0.1 0.01
0.01
0.01
0.1 0.1 1
Not exceeding the maximum permissible error for the one-third of the full capacity of the balance
Stabilization Time
Typical (s)
1 1 1 1 1 1 1
Sensitivity Temperature
Drift (PPM/K)
±6 ±6 ±3 ±3 ±10 ±10 ±10
Typical Minimum
Weight USP
20g 20g 20g 20g 200g
200g
200g
Optimized Min-Weight
(USP, u=0.10%, k=2)
SRP ≤ 0.41d*
8.2g
8.2g
8.2g
8.2g
82g 82g 82g
g, kg, ct, grain, oz, ozt, lb
Basic Weighing; Parts counting; Percent weighing
7.1 in / 18 cm
Span Calibration Points
(g)
400,
Linearity Calibration
Points (g)
To capacity by subtraction
Power input: 100-240 V ~ 200 mA 50-60Hz 12-18VA
Power output: 12 VDC 0.5A
Assembled Dimensions
(W x D x
H)
201 x 317 x 93 mm
7.9 x 12.5 x 3.7 inch
Operating Temperature
Range
-
-
Storage Temperature
Range
Humidity: maximum relative humidity 80 % for temperatures up to 30°C, decreasing linearly to 50%
relative humidity at 40°C
-10°C to 60°C, humidity 10% to 90%, without condensation
Shipping Dimensions
(W x D x H)
550 x 385 x 291 mm
22 x 15 x 12 inch
*SRP refers to the standard deviation for n replicate weighings (nŐ10).