For any further questions, please e-mail us at techsupport@ohaus.com, or call us at 973-377-9000 #2 or ext. 7852 from 8AM to 5PM EST
This list compiles frequently asked questions about the Scout Pro:
a) How do I turn on the units of measure
b) How do I switch between units of measure
c) How do I calibrate my unit
How to Turn On Units of Measure
Enabling or disabling the units of measure can be accomplished in the UNITS menu.
You can also click here for the user manual -- refer to Section 3: Operations, pages EN-11 (navigating the
main menu) and EN-13 (entering the UNIT menu).
Note1: during MENU navigation, use the following
buttons to initiate selections YES or NO.
Note2: depending on the region,the [ON/ZERO
Off] button may be designated as [ON/ 0/T Off].
1. With the scale (and lock switch) OFF: press
and hold [ON/ZERO Off] (approx. 5 seconds)
until the scale flashes MENU.
2. Release the button once MENU is displayed
After releasing the button, the scale will
display CAL.
3. Press [PRINT Unit] repeatedly until UNIT is
displayed.
4. Once UNIT is displayed, press [ON/ZERO Off]
to select this menu.
To Next Page
Need help?
General
