To Next Page
L
Lydia FreySep 12, 2025
What does 'Lo.ref' mean on OHAUS Scales?
- DdesireecraneSep 12, 2025
If your OHAUS Scales display 'Lo.ref', it means the Percent Reference weight or APW is too low for accurate results. Increase the reference weight or APW.
What does 'Lo.ref' mean on OHAUS Scales?
If your OHAUS Scales display 'Lo.ref', it means the Percent Reference weight or APW is too low for accurate results. Increase the reference weight or APW.
What does 'USB.Err' mean on OHAUS Scales?
If your OHAUS Scales display 'USB.Err', it means that the menu or app file cannot be found in the U-disk. Check the U-disk to ensure it contains the required files.
General| Display | LCD |
|---|---|
| Power Supply | AC Adapter or Battery |
| Operating Temperature | 10°C to 40°C |
| Relative Humidity | 10% – 85%, non-condensing |
| Units of Measurement | g, kg, lb, oz |
| Interface | RS232 |
| Application Modes | Weighing, Checkweighing, Percent, Counting |
Lists essential safety warnings for installation, connection, and servicing.
Instructions for connecting the AC adapter and battery installation.
Importance and procedure for initial calibration after installation or relocation.
Identifies and explains the functions of the control panel buttons.
Step-by-step guide for performing span calibration.
Instructions for using the default weighing and counting modes.
A table listing common symptoms, causes, and remedies for issues.
