What does 'Lo.ref' mean on OHAUS Scout SPX2202?
If your OHAUS Scales display 'Lo.ref', it means the Percent Reference weight or APW is too low for accurate results. Increase the reference weight or APW.
What does 'USB.Err' mean on OHAUS Scales?
If your OHAUS Scales display 'USB.Err', it means that the menu or app file cannot be found in the U-disk. Check the U-disk to ensure it contains the required files.
General| Capacity | 2200 g |
|---|---|
| Readability | 0.01 g |
| Display | LCD with backlight |
| Calibration | External Calibration |
| Linearity | ±0.02 g |
| Repeatability | 0.01 g |
| Interface | RS232 |
| Tare Range | Full Capacity |
| Weighing Units | oz |
| Power Supply | AC Adapter |
| Stabilization Time | 1.5 seconds |
| Operating Temperature | 10°C – 40°C |
| Power | 100-240 VAC, 50/60 Hz |
To Next Page