EN-16 STARTER 3100C Bench Conductivity Meter
6 TECHNICAL DATA
6.1 Specifications
Ambient conditions
Indoor use only
Altitude: Up to 2000 m
Specified Temperature range: 5°C to 40°C
Humidity: maximum relative humidity 80 % for temperatures up to 30°C decreasing linearly to
50% relative humidity at 40°C
Mains supply voltage fluctuations: up to ±10% of the nominal voltage
Installation category II
Pollution degree: 2
Operability is assured at ambient temperatures between 5°C to 40°C
0.0 μS/cm…199.9 mS/cm
0.1 mg/l…199.9 g/l (TDS)
0.00 ... 100.0 psu (Salinity)
0 °C…100 °C
± 0.5 % of the measured value
± 0.3 °C
1 point
4 predefined standards
99 measurements
The last calibration data
AC Adapter Input: 100-240V ~ X.XA 50/60 Hz
AC Adapter Output: 12V X.XA
220 W x 175 D x 78 H mm / 0.75 kg
White backlit Liquid crystal
Linear: 0.00 %/°C…10.00 %/°C
Reference temperature: 20 & 25 °C