What to do if my OHAUS Accessories shows Error 8.4?
If the OHAUS Accessories scale displays Error 8.4, it indicates that the weight reading is below the Underload limit. Add load to the scale, and then recalibrate the scale.
What to do if my OHAUS Accessories shows Error 8.2?
If the OHAUS Accessories scale displays Error 8.2, it means the weight reading is below the Power On Zero limit. Add load to the scale and then recalibrate the scale.
What to do if my OHAUS Accessories shows Error 8.1?
If the OHAUS Accessories scale displays Error 8.1, it indicates that the weight reading exceeds the Power On Zero limit. Remove the load from the scale and then recalibrate the scale to resolve this issue.
What to do if my OHAUS Accessories scale shows Error 8.6?
If the OHAUS Accessories scale displays Error 8.6, it means the weight exceeds six digits, causing a display overflow. To fix this, reduce the load on the scale.
What to do if my OHAUS Accessories shows Error 8.3?
If the OHAUS Accessories scale displays Error 8.3, it indicates that the weight reading exceeds the overload limit. To resolve this, reduce the load on the scale.
General| Display | LCD |
|---|---|
| Protection | IP54 |
| Legal for Trade | Yes |
| Calibration | External Calibration |
| Power Supply | AC Adapter |
| Dimensions | 300 x 300 x 120 mm |
| Communication | RS232 |
| Operating Temperature | 0 to 40 °C |
| Relative Humidity | 10% to 85% non-condensing |
To Next Page
