49
RS232 CommandsRS232 Commands
RS232 CommandsRS232 Commands
RS232 Commands
All communication is accomplished using
standard ASCII format. Only the charac-
ters shown in the following table are ac-
knowledged by the balance. Any other
commands, control characters or spaces
are ignored. Commands sent to the bal-
ance must be terminated with a carriage
return (CR) or carriage return-line line
feed (CRLF). For example, a tare com-
mand should appear as shown in the
adjacent diagram. Data output by the bal-
ance is always terminated with a carriage
return - line feed (CRLF).
TARE COMMANDTARE COMMAND
TARE COMMANDTARE COMMAND
TARE COMMAND
Field: T CR LF
Length: 1 1 1
To Next Page
Loading...
