Safety precautions
This document contains important safety information relating to your Ohme charger.
Please retain this document for future reference.
Please read the document fully before using the Ohme charger. Not following the safety
instructions can result in electric shock, re, serious injury or death.
The charger should be inspected periodically to check for damage to the
cabling and the enclosure. Do not use if the product is defective or appears
damaged. Contact Ohme Customer Care for support.
Do not attempt to open, repair, tamper or modify the Ohme charger in any
way. There are no user-serviceable parts.
We strongly recommend that a competent person (e.g. qualied electrician)
installs and/or inspects the installation to check for safety and supply
adequacy before use.
The overall installation should be in accordance with the IET Wiring
Regulations and the IET Code of Practice for Electric Vehicle Charging
Equipment.
Handle the Ohme charger with care. Do not expose any part of the cable to
severe forces, impact or sharp objects.
The Ohme charger is only intended for vehicles that do not require ventilation
during charging (NB all mainstream electric vehicles do not require
ventilation).
You may clean the Ohme charger with a soft damp cloth. Do not use any
solvents or abrasives.
To Next Page
Loading...
