Type 2
Our Type 2 charger is designed to be plugged into your existing un-tethered charge
point. No additional installation is required, simply plug in your new Type 2 charger and
download the Ohme app to start benetting from Ohme's smart features.
The Type 2 charger will talk to your charge point and make sure that it does not charge
above the rating of your unit. If you have an existing 16 A charge point, Ohme will charge
at a maximum rate of 16 A (there's no need to contact us to reduce the rate).
Your Type 2 charger can charge up to a maximum rate of 32 A, if not limited by the rate of
your existing untethered charge point.
IMPORTANT NOTE: the Type 2 charger won't power up unless it's plugged into both a
power supply and an electric vehicle.
To Next Page
Loading...
