OCS SOFTWARE OJMAR 30
5.3. Emergency opening
The lock can be powered from the outside if a battery is faulty and the lock does not have any power. In this situation a 9V 6LR61
battery will be placed in the connectors situated at the bottom of the front according to
Figure 4.4
. The connection has to be made
manually so that the + pole of the battery is on the right and the – on the left. When the battery is correctly placed in the contacts,
the lock will turn on and can be used normally either using the keypad, master key...
5.4 Cleaning
Clean the lock with a soft and damp cloth, and do not use any detergents. Then dry the lock completely. Do not immerse it and
protect it from water and extreme temperatures. Do not expose it to direct sunlight or any other heat source. Do not allow the lock
to drop or subject it to high impacts. Do not disassemble the lock.
To Next Page
Loading...
