Need help?Do you have a question about the Ojmar OTS ADVANCE and is the answer not in the manual?
Overview of the OTS Advance lock system and explanation of manual symbols.
Outlines essential safety rules and precautions for product usage.
Provides contact information for Ojmar technical support.
Details the RFID technology, power, and general features of OTS locks.
Provides detailed measurements and mounting diagrams for lock installation.
Details the steps for opening and closing the lock using the key.
Describes the two configurable lock modes: Free and Dedicated.
Introduces the 15 different types of keys available for the system.
Explains the operation and use cases for dedicated and free keys.
Explains the roles of master and service keys for lock access and maintenance.
Details the multifunction key's capabilities for both dedicated and free locks.
Covers master subgroup, cancellation, and set-up keys.
Details the functionality of event collection and automatic opening keys.
Covers time setting keys.
Covers the lock reset key.
Provides detailed steps and warnings for replacing lock batteries.
Introduces portable programmers and the Ojmar NFC model.
Details the features and operations of the Ojmar NFC programmer.
Explains how to read and write data to keys using the programmer.
Details operations like testing, reading events, and initializing locks.
Covers settings for brightness, version, auto-off, and date/time.
Introduces the desktop reader for key programming.
Guides on installing necessary drivers for the desktop reader on Windows.
Details bracket dimensions and mounting points for the Infoterminal.
Outlines the physical features and connection points of the Infoterminal.
Provides step-by-step instructions for mounting the Infoterminal.
Explains how to operate the Infoterminal and interpret its main screen.
Describes accessing and navigating the Infoterminal's settings.
Lists software capabilities and minimum system specifications.
Covers software setup and license activation procedures.
Details how to log in and access the software's main functions.
Explains how to create and manage groups of locks for organization.
Provides an overview of the "Locks" window and its operations.
Defines operators and covers adding, editing, and deleting them.
Details configuring locks using set-up keys.
Covers the process of recording user keys for lock access.
Explains how to use cancellation keys to block other keys.
Explains the use of events keys to store and retrieve lock access events.
Allows selection of the programmer model (NFC or CNReader).
Covers updating firmware for the Ojmar programmer and locks.
Explains how to set up communication between the PC and the programmer.
General| IP Rating | IP55 |
|---|---|
| Lock Type | Electronic Lock |
| Application | Lockers |
| Power Source | 3V Battery |
| User Interface | LED |
| RFID Technology | ISO14443A (MIFARE Classic, MIFARE Ultralight, MIFARE DESFire) |
To Next Page
