EasyManua.ls Logo

Ojmar OTS ADVANCE - Key Types: Event and Automatic Opening; Event and Automatic Opening Key Functions

Default Icon
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1_OTS LOCKS OJMAR 21
Lock number.
Operating type.
A set-up key can initialise several successive locks, assigning them consecutive
numbers.
NOTE: It is highly recommended for the lock to be set to the correct time (see
Section 1.6.12 and Section 4.11, Point (3)).
NOTE: To perform this action, a key must be created for each lock type (one for
free locks and another for dedicated locks).
NOTE: For use exclusively by authorised personnel of the facility.
1.6.9 Event Collection Key
This key collects the events (Used keys, access times,
etc.) stored in the locks. See Section 4.8 to extract
and consult the information stored on the key.
NOTE: It is highly recommended for the lock to be set to the correct time (see
Section 1.6.12 and Section 4.11, Point (3)).
NOTE: This key can be used on free and dedicated locks.
NOTE: For use exclusively by authorised personnel of the facility.
1.6.10 Automatic Opening Key
This key transmits one hour of automatic opening to the lock. All locks programmed
for automatic opening will be freed at the specified time. There is also the possibility
of choosing automatic opening after a certain number of hours. In this case, the
locks will be set up as free after the selected time after the closure.
In order to create a key of this type you must:
Program the key (See Section 4.11).

Table of Contents

Other manuals for Ojmar OTS ADVANCE

Related product manuals