Oki B430 User Manual

Appendix A Centronics Parallel Interface
43984801TH Rev.1
141 /
Oki Data CONFIDENTIAL
This is a procedure to perform on the operator panel of the printer (B420/ B430/ B440 series).
In the setting of B410 series, use "Printer Menu Setup Tool".
By pressin the "Enter" key after selecting a display content of the operator panel with the "Menu
" key
or "Menu " key, the following setting is available.
The setting is not changed even if turning of the printer.
By pressing the "Online key", the printer exits the menu setting mode, and returns to the offline status.
Online
Press the "Menu " key 9 times.
Centronics Menu [Centronics Menu] is shown on the display.
  
Press the "Enter" key.

Centronics
Enable
*

Press the "Menu " key.
    

   
Bidirectional Centronics
Enable
*  

Press the "Menu " key.
    
 
ECP
Enable
*
Press the "Menu " key.
    
    
(7) Interface Parameter Setting
Items Enable/ Disable of Centronics I/F
Display Function
Enable Enable
Disable Disable
Factory Default: Enable
Items Data Transfer Direction
Display Function
Enable Bi-directional data transfer
Disable Unidirectional data transfer
Factory Default: Enable
Items Enable/ Disable of ECP Mode
Display Function
Enable Enable
Disable Disable
Factory Default: Enable

Oki B430 Specifications

General

Brand	Oki
Model	B430
Category	Printer
Language	English