4. ADJUSTMENT
43984801TH Rev.1
67 /
Oki Data CONFIDENTIAL
Category
Operation panel display
Default
value
Function
*
Only English is supported for panel display
Setting item
(Upper case)
Setting item
(Lower case)
OP MENU FX EMULATION ENABLE
DISABLE
*
Set Category FX EMULATION MENU ENABLE/
DISABLE.
Set to DISABLE, Category FX EMULATION MENU of
User Menu is not displayed. Except Japan Oriented.
[Display Condition]
"SYSTEM MAINTENANCE"-"PERSONALITY"-
"EPSON FX" is ENABLE.
ESC/P
EMULATION
ENABLE
DISABLE
*
Set Category ESC/P MENU ENABLE/DISABLE.
Set to DISABLE, Category ESC/P MENU of User
Menu is not displayed. Only displayed as Japan
domestic oriented.
[Display Condition]
"SYSTEM MAINTENANCE"-"PERSONALITY"-"ESC/
P" is ENABLE.
PARALLEL
MENU
ENABLE
DISABLE
*
Set Category PARALLEL MENU ENABLE/DISABLE.
Set to DISABLE, Category PARALLEL MENU of User
Menu is not displayed.
USB MENU ENABLE
DISABLE
*
Set Category USB MENU ENABLE/DISABLE.
Set to DISABLE, Category USB MENU of User Menu
is not displayed.
NETWORK
MENU
ENABLE
DISABLE
*
Set Category NETWORK MENU ENABLE/DISABLE.
Set to DISABLE, Category NETWORK MENU of User
Menu is not displayed.
[Display Condition]
NIC full assembled
MEMORY MENU ENABLE
DISABLE
*
Set Category MEMORY MENU ENABLE/DISABLE.
Set to DISABLE, Category MEMORY MENU OF User
Menu is not displayed.
SYS ADJUST
MENU
ENABLE
DISABLE
*
Set Category SYS ADJUST MENU ENABLE/
DISABLE.
Set to DISABLE, Category SYS ADJUST MENU of
User Menu is not displayed.
MAINTENANCE
MENU
ENABLE
DISABLE
*
Set Category MAINTENANCE MENU ENABLE/
DISABLE.
Set to DISABLE, Category MAINTENANCE MENU of
User Menu is not displayed.
USAGE MENU ENABLE
DISABLE
*
Set Category USAGE MENU ENABLE/DISABLE.
Set to DISABLE, Category USAGE MENU of User
Menu is not displayed.
MENU
LOCKOUT
ENABLE
DISABLE
*
Set Function MENU LOCKOUT ENABLE/DISABLE.
Set to DISABLE, Category PASSWORD, Category
CHANGE PASSWORD of User Menu is not displayed.
The Initial Value of PASSWORD is "aaaa".
PANEL
LOCKOUT
ENABLE
DISABLE
*
Set Function PANEL LOCKOUT ENABLE/DISABLE.
Set to ENABLE, on the panel only "ONLINE" switch is
ENABLE, it is not able to display MENU.
CONFIG
MENU
NEARLIFE LED ENABLE
DISABLE
*
Set LED ILLUMINATION CONTROL at the occurrence
of NEAR LIFE WARNING of toner and drum.
When it is ENABLE, Attention LED illuminating.
When it is DISABLE, Attention LED non-illuminating.
Once it became life warning error, the status of
temporary retrieving as the cover opening or closing
(LIFE WARNING) is excluded.