Oki B430 User Manual

4. ADJUSTMENT
43984801TH Rev.1
83 /
Oki Data CONFIDENTIAL
ENGINE EP TEST OFF
TEST OFF PAPER
CONNECT
PRT DUTY 1/1
1/1 1/10
1/20
1/50
MODE 00
00 01
02
~
FD
FE
FF
ENGINE RESET
INITIALIZING
ONLINE
Press Key
“SETTING”
Select by
Key “SETTING”
and press key
“MENU▲”
“MENU▼”
Select by
Key “SETTING”
and press key
“MENU▲”
“MENU▼”
Select by
Key “SETTING”
and press key
“MENU▲”
“MENU▼”
Press Key “MENU▲” “MENU▼” and move
In this printer, this setting is not used.
Set Duty that is used for Motor Accelerating Test in the factory.
Setting as 1/n means that after 1 piece of paper printing, it makes
the engine idles away for n-1 piece of paper amount.
The setting is irrevocable because it is used for engine debug
mode.
If set it out of default (00), the printing stops.
Reset, select key
“SETTING”
Reset the following counters that are used in engine part.
・ Drum Total Counter
・ Drum Counter
・ Printing Total Page Counter
But, Printing Total Page Counter is only reset for the count under
500. (This limit is not compliant in the case of reset for PJL
Command)printing stops.

Oki B430 Specifications

General

Brand	Oki
Model	B430
Category	Printer
Language	English